Growatt 6KVA/48V80A ES Hybrid Solar Inverter –(5Kw)

Growatt 5KW Hybrid Solar Inverter SPF 6000ES 48V 80A introduction

The Growatt 5KW Hybrid Solar Inverter SPF 6000ES 48V 80A is a Single-phase solar power generator with great technical features and an attractive appearance. The inverter is popular due to its high PV voltage input design and possibility to cascade multiple and it can operate both with and without a battery. The maximum input voltage (Open Circuit Voltage, VOC) is 450VDC. The hybrid inverter has an integrated MPPT charge controller that optimizes the charging and discharging of the battery, making it last as long as possible. The inverter is compatible with both lead acid and lithium batteries.

Growatt 5KW Hybrid Solar Inverter SPF 6000ES 48V 80A

The MPPT charge controller on the Growatt 5kw 48V Inverter lowers the voltage of panels to the required level to charge the battery. The current is raised with the same ratio the voltage is lowered. This continuously happens during the day to optimize the use of energy. This is dependent on the power of the sun, the angle and the temperature and health of the panels. The charge controller also makes sure the battery will not be overcharged, but also not fully discharged.

Communication with the Growatt 5KW Hybrid Solar Inverte SPF 6000ES 48V 80A & Cascading Multiple Inverters.

Growatt 5KW Hybrid Solar Inverter SPF 6000ES features two levels of communication.

1. The inverter can perform machine-to-machine communication. This is important when cascading multiple inverters to increase power output. In such a case, the Multiple SPF60000ES inverters will be used and one of them will be set as the master. Three inverters can be used to generate a synchronous three-phase power supply. Up to 12 Inverters can be cascaded/paralleled to generate up to 30Kw three-phase or Single phase output. Contact us or Kastom Technologies Limited for technical support in such installations.
2. The inverter can also provide information to humans. This is done through interaction with the Inverter display or through the Growatt Cloud Monitoring accessible through a web browser or by installing a Mobile application. To connect your inverter to the cloud portal,  a separate wifi or GPS dongle allows the Growatt 5kw 48V inverter to be accessed remotely under an intuitive dashboard. You will need WiFi installed with a stable signal at the inverter to establish communication.